Polyresin bathroom accessories ser round with vertical stripe simple design soap dispenser

 
Product introduction:

Product Specification:

Product Pictures: 

Cleaning Tips for the 5-Piece Glass Bathroom Set

I. Daily Cleaning (1–2 times a week, Basic Maintenance)

1. Overall Cleaning: Wipe dust and water stains gently on the surface of all parts with a soft cloth (cotton or microfiber is preferred) dampened with clean water. Use light pressure to avoid rubbing the vertical stripe texture and scratching the resin surface.
2. Vertical Stripe Crevice Cleaning: Use a soft-bristled brush or cotton swab to gently sweep the gaps in the three-dimensional vertical stripes, removing accumulated dust and residual stains to prevent them from affecting the appearance.
3. Cleaning of Residue-Prone Parts: Rinse the inside of the lotion dispenser with clean water in a timely manner after use to avoid sticky residue and pump blockage; wipe the surface water stains of the soap dish with a cloth after each use to prevent water accumulation; rinse the toilet brush thoroughly and drain the water before placing it back into the holder.

II. Stain & Soap Scum Removal (As Needed, Corrosion Prevention)

1. Light Stains: Wipe gently with a soft cloth dipped in diluted mild dish soap, let it sit for 1 minute, then rinse with clean water and dry with a dry cloth immediately.
2. Stubborn Soap Scum: Use diluted white vinegar or citric acid water (ratio of white vinegar to water is 1:3). Dip a soft cloth in the solution and wipe the soap scum area gently. Do not leave it on for more than 2 minutes; rinse thoroughly with clean water and dry at once to prevent corrosion of the resin surface.
3. Important Note: Ensure thorough drying. Air-dried water stains will leave white marks and damage the soft matte finish of the resin.

III. Maintenance of Vertical Stripes & Metal Accessories (Key Points)

1. Vertical Stripe Texture: Avoid wiping with hard brushes or abrasive sponges to prevent texture wear and loss of three-dimensionality. After cleaning, gently press with a dry cloth to absorb water—do not rub vigorously.
2. Accessories (Pump Head, Toilet Brush Rod): Avoid contact with strong acids, strong alkalis, disinfectants, and bleach to prevent surface fading and discoloration. Dry them immediately after use to avoid oxidation and blackening caused by prolonged dampness.

IV. Component-Specific Tips

• Lotion Dispenser: Disassemble and clean the bottle body and pump head thoroughly every month. Rinse the internal pipeline of the pump head and let it dry completely before refilling to avoid bacterial growth from residue.
• Tumbler / Cotton Jar: Rinse the inner wall with clean water every day to avoid accumulation of toothpaste or cotton wadding. Clean thoroughly with mild dish soap once a week and use after drying.
• Soap Dish: Remove soap scum left by soap in a timely manner to prevent hardened scum from adhering to the vertical stripe texture, which is difficult to clean.
• Toilet Brush: Regularly scrub the brush rod and holder with a mild cleaner to keep them clean and hygienic and avoid odor.

V. Prohibitions (Strictly Avoid)