Cleaning & Care Guide for Gradient Blue Glass Bathroom 4-Piece Set

I. Daily Basic Cleaning (Once daily or every 2 days, to prevent buildup)

• General Steps: Use a soft cotton cloth, sponge, or microfiber cloth dampened with warm water to gently wipe the surface of the set, removing dust, water spots, and soap residue. Dry thoroughly with a clean cloth afterward to avoid watermarks that cause limescale.
• Precautions: Do not use rough cloths, steel wool, or scouring pads, as they may scratch the gradient coating and diamond texture of the glass, or damage the matte finish of the sand nickel-colored components.

II. Targeted Cleaning by Component (Once weekly, for deep removal of stubborn stains)

1. Soap Dispenser (with Sand Nickel ABS Pump)

• Bottle Cleaning: Add a small amount of neutral detergent (e.g., dish soap, mild hand soap) to warm water, stir well, and use a sponge to wipe the bottle, focusing on hard-to-reach areas like the bottom and neck. Rinse thoroughly with clean water and dry with a cloth.
• Pump Cleaning: Over time, the pump may clog or retain soap. Unscrew the pump and rinse the internal channels with warm water. For severe clogs, soak the pump in warm water for 5–10 minutes, gently brush the small holes with a soft brush, and air-dry before reinstalling. Avoid acidic cleaners on the sand nickel pump to prevent oxidation and discoloration.

2. Tumbler

3. Toothbrush Holder (with Sand Nickel Metal Rack)

• Metal Rack Cleaning: Dampen a dry cloth with a small amount of neutral detergent and gently wipe the rack to remove dust and water spots. Avoid chlorine or acid-based cleaners (e.g., toilet cleaner, white vinegar) to prevent oxidation, fading, or loss of the matte finish.
• Holder Body Cleaning: Clean the glass portion using the same method as the tumbler. Use a soft brush to clear hair and dust from the cross-divided gaps to ensure ventilation and reduce bacteria.

4. Soap Dish

III. Removing Stubborn Stains & Limescale

• Limescale Removal: Dampen a soft cloth with a diluted citric acid solution (1 part citric acid to 10 parts warm water), gently wipe the affected area, let it sit for 3–5 minutes, then rinse and dry. Alternatively, use a neutral, non-corrosive glass limescale cleaner following the product instructions.
• Stubborn Stains (e.g., dried soap, toothpaste): Soak the stained area in warm soapy water for 5 minutes, then gently scrub with a soft brush. Do not scrape vigorously to avoid scratching the glass texture.

IV. Prohibitions & Care Notes

• Avoid corrosive cleaners: Do not use toilet cleaner, bleach, chlorine disinfectants, or strong acids/alkalis, as they will corrode the glass gradient coating and sand nickel components, causing discoloration, peeling, or loss of shine.
• Avoid prolonged soaking: Do not submerge the set in water for long periods, especially the sand nickel hardware and ABS pump, as this accelerates oxidation and damage.
• Dry thoroughly after cleaning: Always dry the set completely and place it in a dry, well-ventilated area of the bathroom to prevent limescale buildup and bacterial growth.
• Prevent impact: Glass is fragile, and sand nickel components scratch or chip easily. Avoid dropping or knocking the set.
• Regular inspection: Check the sand nickel pump and rack periodically. If loosening or oxidation occurs, clean and dry promptly. Apply a small amount of neutral maintenance oil (e.g., sewing machine oil) if needed to extend service life.